Lifting equipment

P-4,5PG elevator The automobile elevator four-rack-mount electrohydraulic / p to 4,5 t for cars and utility trucks. There is no need of additional retrofitting, the car lift is ready for application as a part of a post of check and adjustment of angles of installation of wheels (descent...

Power - saw bench of Mebor HTZ 800 Diameter of pulleys: 800 mm Diameter of a round timber: to 900 mm Tension tapes: hydraulics Engine capacity: 18,5 KW Slovenian firm MEBOR d. o. o. more than 20 years successfully develops, makes and delivers machines for wood preprocessing. All machines are a...

Press hydraulic P6328B - 01 [Effort of a press nominal 6300 kN, Hod of the ram 500 the mm, Weight is 3150 kg. ] Press hydraulic P6328B - 01 It is intended for a press fitting, an insertion, calibration, stamping, are flexible. In the presence of the correct equipment the press can be used for the...

The machine for processing gorbylya GR - 3 Size gorbylya: 400х100 mm Quantity of saws: Diameter drank 3 pieces: 500 mm Appointment: It is intended for processing gorbylya on a cut board for one pass. Scope: It is applied at the sawing enterprises of average power, and also on productions of pallet...

The machine for cold forging of JGH - 60 [Amount of processing: Strip steel 60? 10, Square steel 25? 25, Round steel? 20.] The machine for cold forging of JGH - 60 The car can be used for designs a print on the general of metal materials including square, flat or round became. These projects can...

The machine for cold forging of JGWG - 70 [Diameter of a pipe the 40 - 70th, bend Radius the 120 - 280th, pipe 2.5 - 7 wall Thickness] The machine for cold forging of JGWG - 70 Technical characteristics: Model Diameter of a pipe Bend radius Pipe wall thickness WG70 - 01 -  40...

Machine trubogibochny WILLOWS 3429 [WILLOWS 3429 - the Machine trubogibochny [d 25.. . 76 mm] The machine trubogibochny with even is intended for are flexible pipes in a cold state with a mandrel (even) and without it by method of winding of a pipe on a bending roller. At the order of the special...

The stand for diagnostics and adjustment of TNVD SDM - 8 - 3,7 the niversalny stand for tests and adjustment of TNVD of diesel engines of a domestic and import pr - v The stand with the asynchronous electric motor (with the frequency converter " - MITSUBISHI" - ) allows to make adjustment and...

The stand for diagnostics and adjustment of TNVD SDM - 8 - 7,5 The universal stand for tests and adjustment of TNVD of diesel engines of a domestic and import pr - v - The stand with the asynchronous electric motor (with the frequency converter " - MITSUBISHI" - ) allows to make adjustment and...

STG - 60 pipe bender [Radius of a gib 4,1, Weight is 410 kg, Engine capacity is 3,0 kW] The SGT - 60 model machine - is intended for cold are flexible water gas pipelines in accordance with GOST 3262 - 75 - Du 15, Du 20, Du 40, Du 50 - with a corner of a gib to 180 ° - in rooms and on building...

The Trubogibochny combined OKS - 8953 machine [Length of the cut carving of 100 mm, Tension seti220/380 In, the Weight of 400 kg. ] The Trubogibochny combined OKS - 8953 machine The machine combined is intended for cutting of a carving on vodogazrprovodny pipes, pieces also are flexible pipes in a...

Scissors RLSS302 elevator The elevator is pantografny scissors. Loading capacity is 3 t. - The elevator is pantografny scissors. Loading capacity is 3 t. For body repair and mounting. Pickup under thresholds. Floor installation. Low profile. It is intended for raising of an avtomobileypra carrying...

Scissors high - quality reinforcing N1226D [The largest diameter of the processed hire 40 * mm - the Weight of 340 kg] Scissors on metal high - quality the N1226D model with the single or continuous course of a knife are intended for cutting of round hire and reinforcing steel. Are used as well as...